 |
 |
| |
|
| Search by Specific Model Size |
|
|
| Search by Gallery Category |
|
|
| |
| |
|
|
|
| The choice of prestigious boat builders worldwide |
|
| At PBT, our goal is to design and fabricate the finest, most meticulous product in our industry. As you will see below, our finished products speak for themselves. |
| |
| Please feel free to contact us to build your next tower. |
|
|
|
| Now viewing
Production Boats /
46' - 55'. |
|
 |
| Now viewing record(s) 1 - 16 |
|
|
|
| 46' Viking Express |
| Viking Yachts /
46' - 0" |
| This tower has a 5' Gap with 36'- 3 spreader outriggers that are hardtop mounted. Other items on the tower are sliding teaser reel lid, 60" control box and pin style rod holders welded to aft outer legs. |
|
| |
|
|
|
| 47' Riviera |
| Riviera Yachts /
47' - 0" |
| This 47 Riviera has a 6'Gap tower with 38'- 3 spreader outriggers that are bridge release. The tower is also equiped with a slider teaser door and a fold down electronics box. |
|
| |
|
|
|
| 48 Viking Convertible Tower |
| Viking Yachts /
48' - 5" |
| This is a 5' Gap tower with 38'- 3 spreader outriggers and low profile radar pod with a sliding teaser reel door. |
|
| |
|
|
|
| 50' Viking Express |
| Viking Yachts /
50' - 0" |
| This older 50' express received a 7' gap tower with a hardtop rod locker, 60" control box and we reinstalled the original hydraulic outriggers to the boat. Also in the hardtop is our slider teaser reel assebly and bomar hatches that flip forward for air |
|
| |
|
|
|
| 50' Viking Convertible |
| Viking Yachts /
50' - 0" |
| This 6' gap tower came complete with a 60" belly band, low profile radar pod, tri-colored lights in the hardtop, platform and sunshade and our 50" control box. We also installed 41'- 3 spreader outriggers and (10) rod holders on the tower. |
|
| |
|
|
|
| 51' Riviera |
| Riviera Yachts /
51' - 0" |
| This is a 7' gap tower w/ large oval radar pod for slider teaser reel assembly and radio drop down box. |
|
| |
|
|
|
| 52' Viking Yacht Sport Tower |
| Viking Yachts /
52' - 0" |
| Viking introduced its hot new 52' Sport Yacht in August 2014 showing off her custom PBT 6' Gap Tower. With all of her extreme curves and angles, PBT followed this same styling through the tower with our contoured and curved pipes, braces and control box. The upper end of the tower is set up for the ultimate comfort and visibility while fishing. A tailored wrapped belly band cushion provides soft padding and clean visibility, while the electronics are recessed into two boxes with lids to protect all of your equipment. |
|
| |
|
|
|
| 52' Viking Express |
| Viking Yachts /
52' - 0" |
| This is a 6'-6" gap tower with 38'- 3 spreader hardtop mounted outriggers and a hardtop rod locker for storage of rods. There are also 2 photos on the dock of a 7' gap tower with 38'- 3 spreader bridge mounted outriggers. |
|
| |
|
|
|
| 52' Viking Convertible |
| Viking Yachts /
52' - 0" |
| Viking introduced its hot new 52'c in June of 2013 showing off her custom PBT 6' Gap Tower. With all of her extreme curves and angles, PBT followed this same styling throught the tower with our contoured and curved pipes, braces, raked enclosure, radar pod and control box. The upper end of the tower is set up for the ultimate comfort and visibility while fishing. A tailored wrapped belly band cushion provides soft padding and clean visibility, while the electronics are recessed into two boxes with lids to protect all of your equipment. |
|
| |
|
|
|
52' Viking Convertible Tower
(Older Style) |
| Viking Yachts /
52' - 0" |
| This is a 8' gap tower with 41'- 3 spreader outrigger bridge release and a large oval radar pod for a radio drop down box and a slider teaser reel door. |
|
| |
|
|
|
| 52' Viking Convertible Hardtop Frame |
| Viking Yachts /
52' - 0" |
| This single perimeter rail hardtop frame was made out of polished pipe with several custom items on the hardtop. These items include our large radar pod w/ the sat dome pod aft, several hardtop handrails and painted satin underside. |
|
| |
|
|
|
| 54' Viking Convertible Tower |
| Viking Yachts /
54' - 0" |
| This is an 8' Gap tower with 39'-3 spreader outrigger house mounted. The hardop is complete with slider teaser door, large drop down box and tri-colored lights. |
|
| |
|
|
|
54'c Bertram
"Hey Chama" |
| Bertram Yachts /
54' - 0" |
| This refit job on the 54'c Bertram received a hardtop & truss style frame with the existing mounting spots reused for wire access. The side V brace was also the main forward leg which mounted on the side of the bridge. For the hardtop we installed our stationary recessed electronics box, a single set of teaser reels, LED down lighting, LED spreader lights aft and a SAT dome pod on top of the hardtop. As for the bridge ladder, the handrail had to tie into the aft bridge rail w/ rod holders for support. |
|
| |
|
|
|
55' Viking Convertible
(Older Boat Style) |
| Viking Yachts /
55' - 0" |
| This 8' gap tower is fitted with our low profile radar pod, 60" pod style control box, 41'- 3 spreader outriggers and a new polished pipe bridge ladder to match the tower. |
|
| |
|
|
|
| 55' Viking Yacht Convertible |
| Viking Yachts /
55' - 0" |
| This brand new Viking hull received a 7' gap tower with 41'- 3 spreader "Bigg Riggs" from Rupp as well as all curved bracing and supports. We also installed our 63" control box, LED spreader lights, LED overhead lights, drop down box, teaser reels and our single leg style sunshade. |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
