 |
 |
| |
|
| Search by Specific Model Size |
|
|
| Search by Gallery Category |
|
|
| |
| |
|
|
|
| The choice of prestigious boat builders worldwide |
|
| At PBT, our goal is to design and fabricate the finest, most meticulous product in our industry. As you will see below, our finished products speak for themselves. |
| |
| Please feel free to contact us to build your next tower. |
|
|
|
| Now viewing
Custom Boats. |
|
 |
| Now viewing record(s) 1 - 76 |
|
|
|
| 26' Boca Grande |
| Boca Grande /
26' - 0" |
PBT worked with Scopinich on this 26' Boca Grande project in 2014 as the boat got a complete overhaul at his facility in Stuart, FL. The frame was fairly simple with all (4) main legs mounting to the covering boards, did an arch style forward leg section for strength, nav lights and a few rod holders to top it off.
|
|
| |
|
|
|
| 28' Buddy Davis Outboard Center Console |
| Buddy Davis /
28' - 0" |
| This center console received a brand new T-top powercoated frame with a fully customized fiberglass hardtop. The hardtop received taco top mount rigger, nav lights, radar pod w/ teaser reels, rod holders, handrails and used the existing electronics box. |
|
| |
|
|
|
| 34'c Gamefisherman |
| Gamefisherman Boats /
34' - 0" |
| This Gamefisherman received a custom molded hardtop and frame with collapsible outriggers |
|
| |
|
|
|
| 36' F&S Outboard |
| F&S Boat Works /
36' - 0" |
| This custom outboard received a polished pipe t-top frame with nav lights, tri-colored lights and a small triangular radar pod. |
|
| |
|
|
|
| 36' Jersey Cape Express |
| Jersey Cape Yachts /
36' - 0" |
| This Marlin tower was built with polished pipe, solid aft legs that turn into the control box, an 84" belly band and 32'-2 spreader Rupp outriggers. We also installed nav lights, recessed LED lights on the underside of the hardtop and our small radar pod. |
|
| |
|
|
|
| 37' Willis Marine |
| Willis Marine /
37' - 0" |
| When PBT was given the green to install the tower on the NEW 37' Willis Marine Walk-around, we were extremely excited. The boat threw a few challenges at us, but we were able to over come them with this final design that you will see in the photos. We had to mount the forward and aft legs into very small fixed areas, installed the rod holder rack above the hardtop and installed our smaller new LED spreader lights. The hardtop received a fixed stationary radio box, painted underside, bomar hatch and hardtop mounted outriggers. As for the standing platfrom, we cut in our easy access openings, installed our smaller single coupler box and mini light pods on the underside. Finally we tightened up the ring to accept our smaller control box and sunshade. The owner, captain and Willis Marine were very pleased with the look/design and the quick install of the tower. |
|
| |
|
|
|
|
| |
|
|
|
40' Jersey Cape Express
"Sea Watch" |
| Jersey Cape Yachts /
40' - 0" |
PBT completed this 40' Jersey Cape Express hardtop and truss frame back in December 2014. Below are a number of photos of the finished product. We installed top gun riggers on top, recessed manual teaser reel cranks, recessed LED lighting and bomar hatches in the hardtop. We also installed a new bow rail on the boat 3 months after it came to Florida.
|
|
| |
|
|
|
| 41' Bahama Boat Works |
| Bahama Boat Works /
41' - 0" |
| PBT installed a full size tuna tower on this 41' Bahama. Complete with 29' Rupp outriggers, custom LED lighting, recessed tri-lights, control box and teaser reel opening for reels. It was also built out of all polished pipe. |
|
| |
|
|
|
| 42' Rybo Margaritavich Walk Around |
| Rybovich /
42' - 0" |
| This is an Express Marlin tower with hardtop mounted & sunshade release outriggers with (25) rod holders mounted on the aft section of the tower. |
|
| |
|
|
|
43' Jarrett Bay Boatworks Express
"Gregarious" |
| Jarrett Bay Boat Works /
43' - 0" |
| This sweet looking 43'c Jarrett Bay Boatworks express "Gregarious" has a 5'-6" gap polished pipe tower, with 2 1/2" front leg pipes and our curved belly band up top. On the platform we installed a 3 in 1 LED spreader light aft, single LED light fwd, (2) recessed tri-colored lights and painted the underside Kingston Gray. We also installed our 63" control box w/ a Satin black painted top, 33'-2 spreader Rupp outriggers, HD9 US teaser reels located in salon and sunshade fiberglass & metal painted Kingston Gray. |
|
| |
|
|
|
| 43' Ryco |
| Ryco Marine /
43' - 0" |
| This hardtop and frame refit was a very simple job. We replaced the hardtop and frame, added a new fiberglass hardtop complete with radar pod, outrigger locks, recessed lighting, under mount speakers and LED lighting. |
|
| |
|
|
|
| 44' Garlington |
| Garlington Yachts /
44' - 0" |
| This re-fit 8' gap express style tower came complete with 36' -3 speader Rupp outriggers, painted sunshade frame & control box black and painted undersides of the sunshade, platform and hardtop. |
|
| |
|
|
|
| 45'c Rybovich "Anejo" |
| Rybovich /
45' - 0" |
| This 45'c Rybovich received a newly re-fit 4' Gap tower with a stationary electronics box on the underside of the hardtop and most of our standard features. We re-mounted the existing outriggers on the boat and installed an old style flat bottom board for the standing platform. |
|
| |
|
|
|
45' Huckins Yacht
"Wombat" |
| Huckins /
45' - 0" |
| This tower was extremely hard to construct with all of the options the owner needed with his tower/ seating. Between adding the aft leg truss, custom hardtop bridge ladder, hatch opening in hardtop, electric sure shade for the cockpit, bench seating up top and rupp riggers. |
|
| |
|
|
|
| 46' Merritt "Tropic King" |
| Merritt’s /
46' - 0" |
| This Merritt received a 6' gap tower with 4 teaser reels in the hardtop, standard low profile radar pod, front legs to the bridge deck and a custom aft ladder as part of the aft bridge rail. |
|
| |
|
|
|
| 46'c Gamefisherman |
| Gamefisherman Boats /
46' - 0" |
| This 46' Gamefisherman received a 5' gap tower with several custom items including, a stationary overhead electronics box on the underside of the sunshade, a custom teaser bracket on the underside of sunshade, black out kit in tower and acylic windshield. |
|
| |
|
|
|
| 46' Release Boat Works Express "Gladiator" |
| Release Boat works /
46' - 0" |
| Release Boat Works and PBT teamed up again to design a full style tower for their new 46' Express for a customer who wanted a very comfortable tower for fishing and diving. For fishing, PBT provided a 63" control box with recessed boxes on each side to house all of their electronics and monitor displays. As well as all the steering components mounted on top of the control box for usability. We have also installed Lumitec Lightings NEW Mirage LED lights on the underside of the sunshade, platform and hardtop which are substantially much smaller than the previous LED lights we use to install. The 36'- 3 spreader outriggers were mounted on the side of the bridge with a center rigger mounted aft below the ring. |
|
| |
|
|
|
| 47'c Buddy Davis |
| Buddy Davis /
47' - 0" |
| This is a 6' Gap tower with a stationary electronics box on the underside of the hardotp w/ a collapsible spring hinge. |
|
| |
|
|
|
| 47' Scarbough "Tar Heel" |
| Scarborough /
47' - 0" |
| We installed a new brushed pipe, single perimeter rail hardtop frame with ladder steps on this renovated 47' Scarbough. |
|
| |
|
|
|
| 50' F&S |
| F&S Boat Works /
50' - 0" |
| This custom 50'c F&S received a 5' gap polished pipe tower with all curved bracing and diagonals. We installed some of our most common options like drop down box, teaser reels, nav lights, tri-colored LED lights and painted undersides to the platform, hardtop and sunshade. We also installed a set of 38'-3 spreader Rupp outriggers. |
|
| |
|
|
|
| 52' Buddy Davis |
| Buddy Davis /
52' - 0" |
| After we removed the existing tower on the Davis, we re-fit the boat with a 7' gap tower. This tower received a 60" belly band and was built out of polished pipe. PBT also installed clip in tri-colored lights, LED spreader lights and our new nav lights. The riggers were original to the boat, so we remounted them to the angle of the tower forward leg. |
|
| |
|
|
|
52'c Scarborough
"Agitator" |
| Scarborough /
52' - 0" |
| PBT just returned home from Bayliss Boatworks after completing a new custom hardtop package with riggers on the 52’ Scarborough “Agitator” for the Duffie brothers. There were many custom features incorporated into her new design, including contoured pipes to flow with her curved lines, 4 teaser reels recessed into the hardtop with custom line guides. The underside was painted satin ice blue and a single EZ2CY panel will be installed to keep the bridge super clean. Check out the boat this summer in OC and Los Suenos next winter. The entire rebuild is something to see. |
|
| |
|
|
|
| 53' Sculley Boat Works Express |
| Sculley /
53' - 0" |
Recently we got the opportunity to complete a re-fit on a 53' Sculley. The boat originally had just a hardtop and frame and we were able to modify parts of the existing frame into our new marlin tower design. The whole forward section of the tower frame (fwd legs & perimeter rail) is the original pipe work from the hardtop frame. We also used the existing hardtop cutting out new ladder openings in the back, put on a new radar pod, cut a teaser door and wire track in and gave it a whole new paint job.
We also powder coated the whole tower frame and bow rail per the customer request. It came out beautiful. |
|
| |
|
|
|
| 53'c Jarrett Bay |
| Jarrett Bay Boat Works /
53' - 0" |
| This hardtop truss style frame has a single hardtop perimeter rail with custom fiberglass hardtop. The hardtop has recessed tri-colored lights, large radar pod with sat dome extension, nav lights and a 4 in 1 quartz light pod on underside of aft hardtop. |
|
| |
|
|
|
| 56'c F&S Boat Works |
| F&S Boat Works /
56' - 0" |
| This 6' gap polished pipe tower received a 60" belly band, curved bracing & supports, our standard drop down box and (4) teaser reels in the hardtop. We also installed custom pop up cleats on the topside of the hardtop per the owners request. All the fiberglass parts were painted a seperate color on the undersides as well as adding our new Maxillume LED spreader lights to the platform. The riggers that were installed were 41'- 3 spreader Rupp "Bigg Riggs". |
|
| |
|
|
|
| 56' Paul Mann "Qualifier" |
| Paul Mann /
56' - 0" |
| This custom hardtop and frame received a custom stationary radio box w/ acrylic lid and the underside of the hardtop was painted with a colored non-skid texture. |
|
| |
|
|
|
57'c Spencer Yachts
"Stalker" |
| Spencer Yachts /
57' - 0" |
| This re-fit that PBT completed on this 57' Spencer was a great little project to work on. We mounted a traditional style hardtop and frame with the front legs going down to the front of the bridge, to give it that full tower look. The hardtop received (4) teaser reels, LED navigation lights, LED clip in tri-colored lights, our large radar pod to hold the teaser reels and the underside of painted Satin Blue. |
|
| |
|
|
|
57'c Island Boat Works
"Cowpoke" |
| Island Boat Works /
57' - 0" |
This fully refurbished 57'c Island Boat Works boat "CowPoke" was finished in March 2015 and is located at its home port in Fort Pierce, FL. This was an 8' gap polish pipe tower with a 60" belly ring up top. The tower also received our 53" control box, stationary recessed electronics box, (2) sets of teaser reels, LED lighting, painted undersides to fiberglass, upper section of tower blacked out and new Rupp "Bigg Riggs" 43'- 3 spreader riggers. We also built the bridge ladder and handrails per the customer request.
|
|
| |
|
|
|
| 57'c Dean Johnson |
| Dean Johnson /
57' - 0" |
This re-fit 6' gap tower came complete with our low profile radar pod, nav lights, color painted undersides to the fiberglass and a stationary radio box on the underside of the hardtop. We also modified the existing outriggers to match our tower after mounting.
After seeing the tower, the owner made a final request, that we design and build a custom scuba tank teak seat that is removable and collapsible for storage. It is to be mounted on the inside covering board of the cockpit. |
|
| |
|
|
|
| 58'c Whiticar |
| Whiticar Boat Works /
58' - 0" |
| This re-fit hardtop frame replaced a full tower that was originally installed on the boat. We installed a truss style frame with our fixed stationary recessed box, teaser reels, nav lights, large stepped radar pod, LED spreader lights and aft legs down to the gunnel. We also installed the aft legs down to the gunnel. |
|
| |
|
|
|
| 58'c Weaver Boat Works |
| Weaver Boat Works /
58' - 0" |
| This has a custom hardtop frame and hardtop with the aft legs down to the gunnel. Comes with slider teaser lid, nav lights, low profile radar pod and a stationary radio box. |
|
| |
|
|
|
| 58' Paul Mann "Alina" |
| Paul Mann /
58' - 0" |
| PBT installed a single perimeter rail with aft leg truss frame made of polished pipe on this Paul Mann boat. We also mounted 41'- 3 spreader Rupp "Big Rigg" outriggers, our large stepped radar pod with the aft section cut out for the 24" SAT tv dome and several LED lights. On the underside of the hardtop, (2) sets of teaser reels were installed as well as our standar drop down box. |
|
| |
|
|
|
58'c Taylor Made
|
| Taylor Made /
58' - 0" |
| This custom Taylor Made refit received a single perimeter rail with a ladder style frame. The hardtop received our curved sliding teaser door, stationary recessed electronics box, LED down lighting, LED spreader lights aft, nav lights, radar pod and SAT tv dome. As for the riggers we installed new 41'-3 spreader outriggers. |
|
| |
|
|
|
60'c Merritt
"Ships Cafe" |
| Merritt’s /
60' - 0" |
| PBT removed the "Ships Cafe" original tower and installed a new custom tower for long time avid angler Pete Boinis. Pete has owned and rigged over twenty prestigious sportfish yachts and chose the detailed team of PBT for his latest project of a total makeover of his 60'c Merritt. This 8' gap tower was designed to flow with the traditional lines of this Merritt with providing a super clean modern look to the tower. A custom bridge rail and ladder were constructed together and welded to the tower per the owners specs. The custom hardtop included recessed teaser reels, LED tri-colored lights, molded LED NAV lights and was finished off with a super gloss Imron Snow White Paint. PBT's own bridge LED spreader lights were integrated into the modern molded platform and new Rupp hydraulic outriggers were installed to provide the ultimate fishing package for Pete. |
|
| |
|
|
|
| 60'c Jim Smith |
| Jim Smith /
60' - 0" |
| This 8' gap polished pipe tower was mounted on the side of bridge for both the front and aft legs. It also received a 50" control box, tri-colored lights, sliding teaser reel door and remounted the existing outriggers. |
|
| |
|
|
|
| 61'c Garlington "Tough Catch" |
| Garlington Yachts /
61' - 0" |
| We Retro-fitted this 61'c Garlington with an 8' gap polished pipe tower. The front legs went to the top of the house, painted sunshade, painted control box and all outside bracing. We also added a few custom handrails to the underside of the hardtop for t |
|
| |
|
|
|
| 62' Weaver Boat Works "Miss Scarlet" |
| Weaver Boat Works /
62' - 0" |
| This Weaver boat received an 8' gap tower with polished pipe, tri-colored lights, slider teaser reel door, NEW PBT radar pod and large drop down box. We also mounted 41' Bigg Riggs with rigger locks and mounted custom handrails around salon windows. |
|
| |
|
|
|
| 63' Merritt "Sierra Hotel" |
| Merritt’s /
63' - 0" |
| This 9' Gap tower came several options including a built in bridge ladder to the aft bridge rail of the tower, low profile radar pod with slider teaser reel asembly and a Merritt style pedestal/control box combo. |
|
| |
|
|
|
63'c Weaver
"Salty" |
| Weaver Boat Works /
63' - 0" |
| We installed an 8' gap tower with a custom aft bridge rail, west coast style bowrail, bridge mounted 36'-3 spreader Rupp outriggers and a custom bridge ladder. They also received tri-colored LED lights, drop down electronics box and a 60" control box. |
|
| |
|
|
|
| 64'c Weaver Boat Works "Southern Pride" |
| Weaver Boat Works /
64' - 0" |
| This 64'c 10' gap tower received our new coupler box on the platform, recessed teaser reels under the sunshade and our 63" control box. It also received 43'-3 spreader outriggers and aft legs turned into the cockpit wing for mounting. |
|
| |
|
|
|
| 64'c Weaver Boat Works "Cyntinory" |
| Weaver Boat Works /
64' - 0" |
| This is a 9' gap tower with 43'- 3 spreader outriggers and a double rail hardtop perimeter rail. The hardtop is fit with a slider teaser reel, drop down box, Release Marine custom grommets, painted light green underside and several other items. |
|
| |
|
|
|
| 64'c Bayliss Boat Works "Man-e-War" |
| Bayliss Boat Works /
64' - 0" |
| This Bayliss boat received a 9ft gap tower with the aft main legs into the side of the cockpit wing, (4) teaser reels in the hardtop and a larger sliding teaser reel bracket door. |
|
| |
|
|
|
64' F&S Boat Works Express
"Full Throttle" |
| F&S Boat Works /
64' - 0" |
This speedy 64’ express “Full Throttle” that was built by F&S boat works was quite an exiting project to work on. From the beginning we knew this boat was going to run over 50 knots, so we worked closely with Jim Floyd to make sure every mounting point for the tower was reinforced and built with the most high tech materials available. In working with the F&S team and their 3D CAD models along with our 3D tower designs, we were able to set the exact location of every brace and pad, before the boat was built. Making it very efficient for the builder The 6’ gap tower was built using polish pipe with 3” front legs and 2 ½” pipe for the aft legs. This really streamlined the look of the tower as we built around the larger pipe on the boat. The tower received (5) spreader lights on the underside of the platform, tri-colored LED lights, hydraulic outriggers mounted on the hardtop , our 63” control box, which fit the large 15” Garmin display, (12) rod holders on aft legs and rocket launcher between inner legs and blacked out the upper section of the tower.
|
|
| |
|
|
|
| 65' Mann Boat Works "D.A. SEA" |
| Paul Mann /
65' - 0" |
| PBT installed a custom hardtop and truss style frame with the aft legs of the frame turning into the side of the house for a less cluttered look. |
|
| |
|
|
|
| 65'c Holton "Tarheel" |
| Holton Custom Yachts /
65' - 0" |
| This is an 8' Gap tower with slider teaser reel, drop down radio box and the underside of the fiberglass parts painted to match the hull. The rigger were reinstalled after the new tower was mounted. |
|
| |
|
|
|
| 65'c Island Boat Works "Jester" |
| Island Boat Works /
65' - 0" |
| This is an 9' Gap, 43'- 3 spreader outrigger with the front legs mounted to the top of the house, just forward of the bridge. |
|
| |
|
|
|
65' Bayliss Boat Works
"Lights Out" |
| Bayliss Boat Works /
65' - 0" |
| PBT installed a 9' Gap polished pipe tower on this 65' Bayliss. Some of the towers features include a stationary recessed hardtop electronics box, 63" control box, easy access aft cut outs in the platform, tri-colored LED lights, LED spreader lights and nav lights. We also installed customer supplied outriggers and built a bridge ladder for the boat. |
|
| |
|
|
|
| 67' Mann Boat Works "Royal Flush" |
| Paul Mann /
67' - 0" |
| The hardtop frame and hardtop received several new items. One being our new hardtop crown, custom recessed hydro switches outboard on either side and hydraulic outriggers. We also installed (2) sat domes with our large stepped radar pod on top of the har |
|
| |
|
|
|
67'c F&S
"! Ay Caranba!" |
| F&S Boat Works /
67' - 0" |
| This 8' gap tower tower received our (4) teaser reel setup with sliding door, easy access aft platform cut outs, 46'-6" 4 spreader Rupp "Bigg Riggs" and our newest 63" control box. We also installed the Hydro locking arms for the outriggers as well as the custom bridge ladder. |
|
| |
|
|
|
| 68'c Bayliss Boat Works "SEVEN" |
| Bayliss Boat Works /
68' - 0" |
| This 9' Gap tower came with multiple custom options including Bayliss supplied radar pod to support slider teaser reel door and drop down radio box. Other tower options were aft legs returned into the side of the house and hardtop recessed speakers. |
|
| |
|
|
|
68'c Jim Smith
"AutoBuilders" |
| Jim Smith /
68' - 0" |
| PBT removed the original hardtop & frame off of the boat and replaced it with a 9' gap tower. We installed tri-colored LED lights, nav lights, LED spreader lights, sliding teaser reel door and many other standard item we would normally mount on a 68'c. As for the outriggers, we re-used the current ones on the boat and just remounted them to follow the front leg of tower. |
|
| |
|
|
|
| 68'c Bayliss Boat Works "Uno Mas" |
| Bayliss Boat Works /
68' - 0" |
| The tower on this 68'c was a 9' Gap with all Carbon Fiber fiberglass parts. We fitted the hardtop with Bayliss custom radar pod, our brand new stationary recessed radio box, misters and hydro riggers. The tower sunshade was fitted with a custom SAT Dome |
|
| |
|
|
|
| 68'c Bayliss Boat Works "BudMan" |
| Bayliss Boat Works /
68' - 0" |
| This 9' gap tower has come with several custom options including Bayliss supplied radar pod, hardtop speakers, tower aft legs returned into the side of the house and 43'-3 spreader outriggers. |
|
| |
|
|
|
| 68'c Buddy Davis |
| Buddy Davis /
68' - 0" |
| This 10' gap tower received a set of 43' Rupp "Bigg Riggs" outriggers, custom bridge ladder and many more of our standard options. |
|
| |
|
|
|
69'c Spencer Yacht
"Da Bait" |
| Spencer Yachts /
69' - 0" |
PBT was back in North Carolina in April to install a custom 9' gap tower package on the first 69' Spencer "Da Bait" for avid Billfish angle Jeff Cohen and Capt. Curt Lind. The boat spends most of the year at Los Suenos and the remaining time in St. Thomas, So Curt spends much of his day in the tower. To accommodate all of his needs up top, we installed a dedicated pair of electric teaser reels under the buggy top, offset the wheel & controls to the STBD side. This allowed us to provide him with a large recessed electronics box to hold various units including 12" display, plus CAT engine displays. To eliminate glare from the sun, PBT painted the entire buggy top frame and fiberglass underside Satin Black. The final custom piece was a wrapped belly band cushion for extra padded comfort. With the various size tackle this customer needs for fishing throughout the world, they required an additional rod storage, which PBT molded into the hardtop to hold (10) rods & reels plus gaffs. Also designed into the hardtop was a recessed electronics box, recess opening to hold (4) electric teaser reels and a Satin painted underside. Rupp's 48'- 4 spreader hydraulic outriggers were installed to provide the ultimate spread, along with (6) rod holders on the tower aft legs. LED spreader lights and tri colored accent lights provided bright lighting throughout the tower.
When you see "Da Bait" in Costa Rica and St. Thomas, take a close look at PBT's curved pipes and contoured fiberglass parts that provide a perfect fit to the Spencer styling. |
|
| |
|
|
|
| 70'EB F&S Boat Works |
| F&S Boat Works /
70' - 0" |
| This 7' gap polished pipe enclosed bridge tower received 3" front legs and traditional ladder style aft legs. The tower also has 3 in1 quartz light aft, nav lights, 60" control box and 50'- 4 spreader Rupp "Bigg Riggs" outriggers. |
|
| |
|
|
|
| 70'c Wanchese Boat Works |
| Wanchese /
70' - 0" |
| This 9' Gap tower received a 60" control box, 43-3 spreader hydro outriggers, tri-colored lights and the pipe to be polished. We also built a custom hardtop radio box to support electronics and an air flow box per the customers request. |
|
| |
|
|
|
71'c Jim Smith
"Fish On" |
| Jim Smith /
71' - 0" |
| PBT brought their talents up to Stuart, FL this spring to install a state-of-the-art custom designed tower on the latest Jim Smith Tournament boat "FISH ON". While working closely with owner Rob Kathary, President of Jim Smith Boats, John Vance and Capt. Elliot Cline, the PBT team spent months discussing every one of the owners needs in their tower package for fishing throughout the world. Detailed 2D & 3D CAD drawings where supplied to design the perfect 10' gap tower and electronic equipment for the overhead recessed box and control box. The large Night Vision/Search lightwas custom molded on the underside of the platform along with five molded LED spreader lights. Other features include a custom SATIN finished anodized pipe, ALL fiberglass parts were fabricated using Carbon Fiber material, black buggy top to reduce glare and the underside of the custom hardtop was finished with a low maintenance SATIN non-skid paint. Congratulations to Rob and the crew of "FISH ON" for winning the Bermuda Triple Crown Tournament Series. |
|
| |
|
|
|
72'c F&S Boatworks
"You Never Know" |
| F&S Boat Works /
72' - 0" |
| This "Contour Edition" 72'c F&S hardtop frame is the 1st frame PBT has built with all curved pipe for that Ultimate custom look. The hardtop came complete with nav lights, stepped radar pod with SAT dome insert, teaser reels, drop down box and an addition |
|
| |
|
|
|
|
| |
|
|
|
73' Bayliss Boat Works
"Shark Byte" |
| Bayliss Boat Works /
73' - 0" |
| PBT installed several new custom options on this 11' gap tower that we tailored for the owner and captain on Shark Byte. The first item we created was a single larger recessed box for our 63" control box with the steering wheel off to the starboard side. The next item we created for them, was a cuved aft side door for the teaser reel and drop down box lids. Finally we installed Bayliss's custom radar pod that was specifically altered to fit our hardtop componenents. Other standard items that we installed on this tower include easy access openings on the platform, nav lights, tri-colored LED nav lights, LED spreader lights and bridge ladder. |
|
| |
|
|
|
80'c Bayliss Boat Works
"Dream Time" |
| Bayliss Boat Works /
80' - 0" |
This 80' Bayliss received an 11'-6" gap tower made with polished pipe and 3" front legs. As you will notice we have curved and contoured all the tower bracing and supports to match the style of the Bayliss boat. On the hardtop we installed LED navigation lights, LED tri-colored ligths, Bayliss's custom radar pod with a PBT SAT dome extension molded in, (4) teaser reels, drop down box and S/S grommets on underside for teaser lines. As for the platform, it received our newest coupler box on top, 3 in 1 and single light pod on the underside with our easy entry cut out in the platfrom when coming up the ladder.
For fishability, we painted the upper section of the tower and control box top Satin Black as well as installing hydraulic outriggers on the boat. |
|
| |
|
|
|
| 80' Weaver Boat Works "Islamar" |
| Weaver Boat Works /
80' - 0" |
| Weaver Boat Works just splashed there new 80'c sportfish with a new PBT SATIN finished anodized pipe tower. As with all of our towers, we spent countless hours working with the customer to make sure he received everything on his wish list for his new tower. We hooked him up with (4) teaser reels and a drop down box in the hardtop, double rail perimeter rails around the hardtop and aft leg mounting into the side of the house. We also installed our black out kit up in the tower to reduce glare by spraying SATIN black paint on the sunshade and control box. On the riggers, we installed a set of 50'- 4 spreader Rupp Hydraulic outriggers with hydro locking arms and layout arms. |
|
| |
|
|
|
| 80'c Weaver Boat Works " Miss Pat" |
| Weaver Boat Works /
80' - 0" |
| This 12' gap tower received 49'- 4 spreader hydraulic outriggers, a custom bridge ladder, handrails around the house windows, tri colored lights and our large drop down box in the hardtop. |
|
| |
|
|
|
84'c Bayliss Boat Works
"Orion" |
| Bayliss Boat Works /
84' - 0" |
PBT traveled to Wanchese, NC to Install an ultra custom 13” gap tower on the largest build to date at Bayliss Boat Works, the 84’ “Orion”. We worked closely with the owner Mr. Healey, Capt Justin and Bayliss in the development of the tower not only for aesthetics but functionality as well. Every angle, radius, and curve of the tower and fiberglass parts, were custom designed to follow every inch of this beautiful work of art. The aft tower legs were custom angled at 12 degrees to make climbing this massive tower super comfortable. We also created a dual flip up seat system with foot rests for the owner who likes to spend a lot of time in the tower. Another new custom item that we worked with Capt Justin was the aft electronic display inside the radar pod just aft of the teaser reel lid cavity. This would allow the captain to be able to see his sounder and charts while looking aft into the cockpit and not having to turn around.
Some of the other items we installed on this tower were (4) teaser reels, a larger drop down box, hydraulic outriggers, custom release marine grommets in the hardtop, our 63” control box with large electronics box and offset controls , tri-colored LED lights and (5) LED spreader lights on the underside of the platform.
|
|
| |
|
|
|
| 85'c Weaver Boat Works |
| Weaver Boat Works /
85' - 0" |
| This 85'c Weaver received a 10ft gap tower with a few custom items other than our standard setup. We installed a set of dual radar pods that we molded together on top of the hardtop to support there 2 radar electronic package. As well as a custom radar mast to be mounted on top of our radar pod to have better visibility for the Simrad 4G Broadband that was installed. Some other items that we installed on the tower were our 63" control box, LED spreader light, LED overhead lights, nav lights, a custom swim ladder with sockets and a set of 50' - 4 spreader Rupp Hydrauilic Outriggers. |
|
| |
|
|
|
86' Jim Smith
"Sapelo" |
| Jim Smith /
86' - 0" |
Our PBT south road crew did not have to travel far from home to mount this new 86'c Jim Smith Tournament Boats, Inc. polished pipe frame and hardtop in Stuart, Florida. With the help of Jim Smith and Custom Marine Electronics we were able to develop a very detailed hardtop layout which included SAT dome pods, raised pods for all the electronic components, our dual radar pod and (4) JL Audio M770 recessed speakers on the underside. Some of the other items we installed in the hardtop were LED spreader lights, LED overhead lights, LED nav lights, and our slider teaser reel.
|
|
| |
|
|
|
| 90' Affinity Yacht |
| Affinity Yachts /
90' - 0" |
| This custom Affinity Yacht received a 6' gap tower with all (4) legs mounted on top of the hardtop. We built custom parts specifically for this boat including a wider sunshade, belly band and bridge ladder to the tower w/ teak steps. |
|
| |
|
|
|
| 91' SeaForce |
| Sea Force /
91' - 0" |
| On this particular hull, we built the metal hardtop arch for the seaforce hardtop, the radar mast on top of the hardtop and installed the hydraulic outriggers. |
|
| |
|
|
|
105 Jim Smith
"Marlena" |
| Jim Smith /
105' - 0" |
| PBT has completed alot of work for all different sizes of yachts, but this 105 jim smith was no small feat. We started off with very detailed CAD designs for the hardtop and arch frame as well as the custom bow rail. Once these items were approved by the owner, captain and electronics company we started to move forward. But in the mean time, our welders/fabricators started building on site all of the custom railings, window railings and each custom ladder. We even built railings down in the engine room per jim smiths request. After everything was fitted to the boat and installed, it revealed some very detailed work by the PBT crew that would make any owner/captain happy to have us work with them. |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
