Search by Manufacturer
 
Search by Specific Model Size
' "  
Search by Gallery Category
Custom Boats (76)
34' and smaller (3)
35' - 45' (15)
46' - 55' (13)
56' - 65' (26)
66' - 75' (16)
76' - 85' (6)
86' and larger (4)
Motor Yachts (7)
34' and smaller
35' - 45'
46' - 55' (1)
56' - 65' (3)
66' - 75' (2)
76' - 85'
86' and larger (1)
Production Boats (55)
34' and smaller (2)
35' - 45' (9)
46' - 55' (16)
56' - 65' (14)
66' - 75' (9)
76' - 85' (5)
86' and larger (2)
Outboard (6)
Re-Fits (24)
 
 








Photo Gallery Listing
The choice of prestigious boat builders worldwide
At PBT, our goal is to design and fabricate the finest, most meticulous product in our industry. As you will see below, our finished products speak for themselves.
 
Please feel free to contact us to build your next tower.
Now viewing Production Boats.
Now viewing record(s) 1 - 55
Side Profile Dock
31'c Bertram
Bertram Yachts / 31' - 0"
This custom molded hardtop and frame received everything the owner wished it could have for such a small top. We designed and built a custom stationary radio box on the underside of the hardtop per the owners speced out electronics he wanted on his boat. We also installed 28' Rupp single spreader hydraulic outriggers with dual action lay down and hydraulic locking arms. To finish off the hardtop we added customer supplied teaser reels, LED NAV lights, tri-colored LED lights, LED spreader lights and several rod holders to fulfill his fishing needs.
   
Side Profile
33' Cabo Express
Cabo Yachts / 33' - 0"
   
Side Profile View
35' Cabo Express
Cabo Yachts / 35' - 0"
This cabo express boat has a 4' Gap with hardtop mounted 32'- 2 spreader outriggers and rod holders on the hardtop aft rail.
   
Side Profile
37' Grady White
Grady White Boats / 37' - 0"
Installing a tower on the 37' Grady White while integrating our tower with the factory hardtop and frame was quite the challenge. First, we had to create custom forward hardtop pads for both the top and bottom of the hardtop. Second, we had to add a custom truss in between the front legs below the hardtop but also having to miss the forward windshield door that opens up so you could get to the front of the boat. We also had to create spacers between the hardtop and our perimeter rail as we were unable to bolt our perimeter rail directly the hardtop fiberglass as you will see in the photos.
Some other items we installed on the tower were a custom radar mast, rod holder mounted on the inner ladder legs, rod holders behind the tower sunshade seating, (2) rod holders off the side of the tower ring and 31'-2 spreader Rupp outriggers.
On the platform we installed LED spreader lights and LED down lighting.
   
side profile
41' Rampage Express
Rampage Yachts / 41' - 0"
This 41' Rampage express would be the first one PBT completed over in Anna Maria, FL at Galati Yacht Sales. The tower received a 4ft gap polished pipe with (2) dual rod locker storage boxes on the underside of the hardtop. We also installed tri-colored LED lights, nav lights, (3) LED spreader lights, our 60" control box and Rupp 31'- 2 spreader outriggers mounted on the hardtop. The enclosure was also (4) sided Strata-glass.
   
Side Profile
42' Express Marlin Tower
Viking Yachts / 42' - 0"
On this Marlin tower, we designed the tower to fit the customers needs which was to feel like he had a cruising style tower. So we installed a longer and lower benchseat with backrest up in the tower and bomar hatch in the hardtop for more air flow. The tower also received LED spreader lights, rod holders on the inner aft legs, (4) sided enclosure and 30'-2 spreader Rupp outriggers.
   
Aft Perspective
42' Express Tower
Viking Yachts / 42' - 0"
With all the newest features on the 42' Viking Express, like the lift up mezzanine we had to re-engineer the aft ladder section of our tower so that it would not interfere with their mezzanine. As you will see in the photos, we twisted the inner ladder leg to be parrallel with the boat forward to aft. Thought it may look awkward, it functions real well when climbing up the tower. We also installed on this 4' gap tower, LED NAV lights, tri-colored LED lights, mini LED spreader lights, easy access fiberglass in the platform fiberglass and 31'-2 spreader Rupp outriggers.
   
Side Profile
42' Invincible
Invincible Boats / 42' - 0"
PBT was given the opportunity of designing, building and installing the most custom tricked out tower package ever installed on a outboard style boat. Mr. Leon and his highly experience team had a very detailed list of ideas and options they had to have designed into the ultimate tower for their fishing style. Together we spent numerous hours in CAD design to develop a super clean look with curved forward legs and bracing, along with our signature curved fiberglass parts. One new feature was a molded sealed kite locker with shelves on the underside of the hardtop, followed by a molded electronics wedge and recessed electric teaser reels with remotes to the tower control box. The upper end of the tower was designed with a full complement of electronics including a 12” Garmin display, night vision and search light controls, full engine system and bow thruster joy stick. For the Miami style of fishing, we also welded two rod holders onto the bench seat backrest, for the team to be able to quickly cast to tailing Sailfish. Another nine rod holders were welded throughout the tower for storage and the ones on the aft main tower legs have integrated steps for ease of climbing the tower. We also designed a six holder rocket launcher into the deck live well for the perfect live bait set up. Another trick feature, because this team tournament fishes in extreme conditions, we molded in a drip ledge aft on the top, so the crew sitting on the mezzanine will not get soaked with water. Five LED spreader lights provide bright lighting for their night fishing trips, along with tri-colored lights for accent. To finish off the ultimate fishing machine, we installed 28’ single spreader riggers on the hardtop, to provide the spread this team needed for all their trolling in the Bahamas.
   
running
43' Sea Hunter
SeaHunter / 43' - 0"
This was the first Sea Hunter PBT ever worked on and it was such a pleasure working with not only the owner and captain, but the manufactor as well. This 3' gap, polished pipe tower received a number of options including custom tower reel seats off the belly band, 28' single spreader Rupp outriggers, rod holders with the steps mounted on top for climbing into the tower, nav lights, led overhead and spreader lights and two removable backrests seats with cushions. We also had the upper control box and sunshade frame painted with a satin flag blue paint.
   
Side Profile View Running
45 Viking Express
Viking Yachts / 45' - 0"
This is our standard tower for the 45 Viking Express yacht. Its a 5' Gap with rod holders, outriggers and teaser reels mounted on the tower.
   
Side Profile
46' Viking Express
Viking Yachts / 46' - 0"
This tower has a 5' Gap with 36'- 3 spreader outriggers that are hardtop mounted. Other items on the tower are sliding teaser reel lid, 60" control box and pin style rod holders welded to aft outer legs.
   
Side Profile View
47' Riviera
Riviera Yachts / 47' - 0"
This 47 Riviera has a 6'Gap tower with 38'- 3 spreader outriggers that are bridge release. The tower is also equiped with a slider teaser door and a fold down electronics box.
   
Side Profile View Running
48 Viking Convertible Tower
Viking Yachts / 48' - 5"
This is a 5' Gap tower with 38'- 3 spreader outriggers and low profile radar pod with a sliding teaser reel door.
   
Side Profile
48'c Cabo
Cabo Yachts / 48' - 0"
   
Side Profile View
50' Viking Express
Viking Yachts / 50' - 0"
This older 50' express received a 7' gap tower with a hardtop rod locker, 60" control box and we reinstalled the original hydraulic outriggers to the boat. Also in the hardtop is our slider teaser reel assebly and bomar hatches that flip forward for air
   
Running View
50' Viking Convertible
Viking Yachts / 50' - 0"
This 6' gap tower came complete with a 60" belly band, low profile radar pod, tri-colored lights in the hardtop, platform and sunshade and our 50" control box. We also installed 41'- 3 spreader outriggers and (10) rod holders on the tower.
   
Side Profile View
51' Riviera
Riviera Yachts / 51' - 0"
This is a 7' gap tower w/ large oval radar pod for slider teaser reel assembly and radio drop down box.
   
side profile water
52' Viking Yacht Sport Tower
Viking Yachts / 52' - 0"
Viking introduced its hot new 52' Sport Yacht in August 2014 showing off her custom PBT 6' Gap Tower. With all of her extreme curves and angles, PBT followed this same styling through the tower with our contoured and curved pipes, braces and control box. The upper end of the tower is set up for the ultimate comfort and visibility while fishing. A tailored wrapped belly band cushion provides soft padding and clean visibility, while the electronics are recessed into two boxes with lids to protect all of your equipment.
   
Side Profile View Running
52' Viking Express
Viking Yachts / 52' - 0"
This is a 6'-6" gap tower with 38'- 3 spreader hardtop mounted outriggers and a hardtop rod locker for storage of rods. There are also 2 photos on the dock of a 7' gap tower with 38'- 3 spreader bridge mounted outriggers.
   
Fwd Perspective
52' Viking Convertible
Viking Yachts / 52' - 0"
Viking introduced its hot new 52'c in June of 2013 showing off her custom PBT 6' Gap Tower. With all of her extreme curves and angles, PBT followed this same styling throught the tower with our contoured and curved pipes, braces, raked enclosure, radar pod and control box. The upper end of the tower is set up for the ultimate comfort and visibility while fishing. A tailored wrapped belly band cushion provides soft padding and clean visibility, while the electronics are recessed into two boxes with lids to protect all of your equipment.
   
Side Profile View
52' Viking Convertible Tower
(Older Style)
Viking Yachts / 52' - 0"
This is a 8' gap tower with 41'- 3 spreader outrigger bridge release and a large oval radar pod for a radio drop down box and a slider teaser reel door.
   
Side Profile View
52' Viking Convertible Hardtop Frame
Viking Yachts / 52' - 0"
This single perimeter rail hardtop frame was made out of polished pipe with several custom items on the hardtop. These items include our large radar pod w/ the sat dome pod aft, several hardtop handrails and painted satin underside.
   
Fwd perspective running
54' Viking Convertible Tower
Viking Yachts / 54' - 0"
This is an 8' Gap tower with 39'-3 spreader outrigger house mounted. The hardop is complete with slider teaser door, large drop down box and tri-colored lights.
   
aft view compare
54'c Bertram
"Hey Chama"
Bertram Yachts / 54' - 0"
This refit job on the 54'c Bertram received a hardtop & truss style frame with the existing mounting spots reused for wire access. The side V brace was also the main forward leg which mounted on the side of the bridge. For the hardtop we installed our stationary recessed electronics box, a single set of teaser reels, LED down lighting, LED spreader lights aft and a SAT dome pod on top of the hardtop. As for the bridge ladder, the handrail had to tie into the aft bridge rail w/ rod holders for support.
   
Side Profile View
55' Viking Convertible
(Older Boat Style)
Viking Yachts / 55' - 0"
This 8' gap tower is fitted with our low profile radar pod, 60" pod style control box, 41'- 3 spreader outriggers and a new polished pipe bridge ladder to match the tower.
   
Side Profile
55' Viking Yacht Convertible
Viking Yachts / 55' - 0"
This brand new Viking hull received a 7' gap tower with 41'- 3 spreader "Bigg Riggs" from Rupp as well as all curved bracing and supports. We also installed our 63" control box, LED spreader lights, LED overhead lights, drop down box, teaser reels and our single leg style sunshade.
   
Side Profile View
56' Viking Convertible
Viking Yachts / 56' - 0"
This Viking Demo had a 9' Gap, 43'- 3 spreader bridge release outrigger with a large oval radar pod.
   
Side Profile
57' Viking Convertible
Viking Yachts / 57' - 0"
This 8' gap tower came complete with our NEW larger stepped radar pod, 60" control box, tri-colored lights in the hardtop, platform and sunshade, and 3 sided EZ2CY enclosure. The tower also received 43'- 3 spreader outriggers.
   
Side Profile View Running
60' Viking Convertible
Viking Yachts / 60' - 0"
This 8' gap tower comes complete with our new large drop down box, bullet style radar pod for slider teaser reel door and drop down box, tri-colored lights in the hardtop, platform and sunshade, 43'- 3 spreader outriggers and our single style leg sunshade
   
Side Profile View Running
61' Viking Convertible
Viking Yachts / 61' - 0"
This 9' gap tower comes with 43'- 3 spreader outriggers, tri-colored lights and our single style leg sunshade. Also attached are photos of a 2nd boat with the undersides painted on the hardtop, platform and sunshade.
   
Side Profile View
61' Viking Convertible
Viking Yachts / 61' - 0"
This single perimeter rail hardtop frame was built with truss style aft legs, radar pod for sat tv & radar aray, underside of hardtop & handrails painted gray, 41'- 3 spreader outriggers and a custom full length cockpit sunshade w/ gray material on unders
   
Aft Perspective View Running
61' Viking Enclosed Bridge
Viking Yachts / 61' - 0"
There are two photos of a 6' gap tower with the legs to the top of the hardtop and two photos for a 9' gap tower with the front legs to the front of the bridge. The 9' gap tower also has
   
Side Profile View
61' Viking Enclosed Bridge
Viking Yachts / 61' - 0"
This 8' gap tower has the tower front legs to the front of the bridge and a custom two person bucket seats up in the tower.
   
Side Profile
63'c Bertram
Bertram Yachts / 63' - 0"
PBT installed a custom hardtop & frame that came complete with 43'- 3 spreader Rupp "Bigg Riggs" outriggers, tri-colored LED lights, (4) speaker slots in hardtop for recessed speakers and a stationary radio box on the underside of the hardtop. We also created a unique aft seat with backrest that was incorporated into the side saftey rail and bridge ladder opening railing.
   
Side Profile View
64' Viking Convertible
Viking Yachts / 64' - 0"
Both towers in the 64'c photos are 10' gap towers with 43'- 3 spreader outriggers, large oval radar pod and tri-colored lights. One of the towers has the underside of the fiberglass painted to match the hull.
   
Side Profile View
64' Viking Enclosed Bridge
Viking Yachts / 64' - 0"
This 6' gap enclosed bridge tower has its front legs to the top of the hardtop. Also came complete with 43'- 3 spreader outriggers, center ladder with acylic white steps and molded quartz lights on the underside.
   
Side Profile View
65' Viking Convertible
Viking Yachts / 65' - 0"
This is an 8' Gap tower with 43'- 3 spreader outriggers, large oval radar pod to fit teaser reels and a flip radio down box.
   
Side Profile View
65' Viking Enclosed Bridge
Viking Yachts / 65' - 0"
This 6' gap enclosed bridge tower has its front legs to the top of hardtop. It also comes complete with 43'- 3 spreader outriggers, nav lights in the platform, acrylic center ladder steps and a 3 sided aft bridge rail.
   
Side Profile View
65' Viking Enclosed Bridge (Traditional Ladder Steps)
Viking Yachts / 65' - 0"
This 9' gap enclosed bridge tower has its front legs mounted to the front of the bridge as well as having traditional ladder steps on either side like a convertible. The bridge deck was also extend out as you will see in one of the photos per the owner.
   
Side Profile
66'c Viking Yacht
Viking Yachts / 66' - 0"
Viking rolled out there new 66'c sportfisher, sporting off a new PBT 9' gap, brushed pipe tower with carbon fiber fiberglass parts. All (4) main fiberglass parts were constructed with this carbon fiber material which has dropped the weight considerably off the parts. We also installed tri-colored LED lights, LED spread lights, electronics drop down box, 43'-3 spread Rupp outriggers, swept/curved supports for the tower and our 63" control box.
   
Side Profile View
68 Viking Convertible
Viking Yachts / 68' - 0"
This 10' gap tower comes with 43'- 3 spreader outriggers and 2 1/2" front and aft legs.
   
Side Profile View
68' Viking Convertible (Hardtop Frame)
Viking Yachts / 68' - 0"
This custom molded hardtop with single perimeter rail aluminum frame came with our large radar pod, two single quartz lights aft on the underside of the hardtop, U shaped handrail on the underside, gold polished rod holders and 43'- 3 spreader outriggers.
   
Forward Tower Perspective
70' Viking Convertible
Viking Yachts / 70' - 0"
This 9' gap tower came complete with 46'- 4 speader hydraulic locking and aft back bar. As well as our large stepped radar pod for teaser reels and a drop down electronics box. It also received our 63" control, tri-colored LED lights, LED speader lights a
   
Side Profile Dock
70' Viking Enclosed Bridge
"Fa La Me"
Viking Yachts / 70' - 0"
This brushed pipe tower received a 9' gap with the front legs to the front of the bridge and our standard center ladder layout. As you will notice in the photos, we had his teaser reels custom painted white to match the hardtop overhang, where the reels are mounted. We also installed a hailer horn in his forward light pod.
   
Aft perspective view at dock
70' Hatteras Enclosed Bridge
Hatteras Yachts / 70' - 0"
This 7' gap tower was designed with traditional style ladder step, 43'-3 speader Rupp outriggers, nav lights in the corner of platform fiberglass, bridge ladder safety rail and several fin style rod holders.
   
Side Profile View
74' Viking Convertible
Viking Yachts / 74' - 0"
This is an 11' gap tower with 47'- 4 spreader outriggers, 3" forward pipe for the legs and a large radar pod for slider teaser reel and drop down radio box.
   
Side Profile View
74' Viking Convertible (Hardtop Frame)
Viking Yachts / 74' - 0"
This custom molded single perimeter rail with truss style aft legs hardtop frame comes complete with our dual radar pod, side mount fiberglass pods, 47'- 4 spread hydraulic outriggers and quartz light pods on underside of hardtop.
   
Side Profile View
74' Viking Enclosed Bridge
Viking Yachts / 74' - 0"
This 7' gap tower came with our large belly ring, 2 1/2" front legs to to of the hardtop, acrylic ladder steps, 43'- 3 spreader outriggers and our dual radar pod. The platform was outfitted with 3 single quartz light pod aft and 1 fwd.
   
Side Profile
76' Viking Convertible
Viking Yachts / 76' - 0"
This 9'-6" gap tower was built with 2 1/2" front and aft legs, our new fiberglass platform aft section cut out and 48'-4 Spreader Rupp Hydro Riggers. We also installed our new 63" control box in the tower.
   
Side Profile
76' Viking Enclosed Bridge
Viking Yachts / 76' - 0"
This 7' gap tower came complete with 84" belly band, 43- 3 spreader Hydro Outriggers, new led spreader lights and our stationary electronics box on the underside of the sunshade. We also installed a hailer horn inside of light recess per the customer.
   
Side Profile View
82' Viking Convertible
Viking Yachts / 82' - 0"
With this 12' gap tower you will tower above the rest at the dock. The tower comes complete with our new PBT stepped style radar pod, new Xeon 24V spreader lights and 49'- 4 hydraulic spreader Super Outriggers. This tower also has our new hardtop crown.
   
Side Profile on Dock
82' Viking Enclosed Bridge
Viking Yachts / 82' - 0"
This 7' Gap tower on the 82' EB came complete with acrylic steps, nav lights in the platform, benchseat & backrest and our 65" Pod style control box w/ pedestal. The outriggers were 47'- 4 spreaders with hydraulic locking & layout arms as well.
   
Side Profile Dock
82' Viking Enclosed Bridge
Viking Yachts / 82' - 0"
This 11' gap tower on the 82' EB came complete with acrylic steps, nav lights in platform, benchseat with backrest, our 65" control box with pedestal mount and recessed teaser reels in tower sunshade underside. We also installed a hailer horn on the underside of the platform inside the light pod.
   
Side Profile
92' Viking Yacht
Enclosed Bridge
Viking Yachts / 92' - 0"
This new 92' Viking enclosed bridge tower sports an 11' gap with a 7' wide ring up top and 3"pipe to the front of the bridge for the front legs. We also included all of our curved style bracing and debuted our brand new 73" wide tower control box. Under the standing platform we installed a 3 in 1 light pod with (2) spreader lights and a hailer horn in the center insert going forward with (2) spreader lights aft. We also installed (4) tri colored lights on the underside as well as molded in nav lights.
On the sunshade we mounted our fixed electronics box on the underside to mount both DDEC engine displays for better visibility while navigating. We also installed tri-colored lights, our Rybo style belly band cushion and (2) cushion corner seats up in the tower.
Finally we installed a set of Rupp 55'- 5 spreader "Bigg Rigg" outriggers with a hydraulic rigger system for layout and locking.
   
Aft Perspective View Running
90' Affinity Yacht
Affinity Yachts / 90' - 0"
This custom Affinity Yacht received a 6' gap tower with all (4) legs mounted on top of the hardtop. We built custom parts specifically for this boat including a wider sunshade, belly band and bridge ladder to the tower w/ teak steps.
   
 

2100 Avenue B • Riviera Beach, FL 33404 • Phone: (561) 493-2828 • Fax: (561) 493-5749
5738 Route 9 • New Gretna, NJ 08224
Copyright © 2018 Palm Beach Towers. All rights reserved.
 
asdfasdfasdf